HOME PAGE

PAGE 1

PAGE2

PAGE 3

Home Page-Foreword

The 'Eggbeater' Antenna

About Eggbeater Ant

RX & Doppler Tuning

PAGE 4

F5VIF Radio Station

F5VIF / P

F5VIF / P

DL-Special DX Antenna

Shack+information

HF

VHF/UHF/SHF

Yaesu G-800SDX antenna rotor    ~    Price : € 100
Perfect working condition. First owner. Packed and stored. Control box like new. 450 deg rotation and adjustable rotation speed for 1 full turn from 43 sec to 93 sec. Vertical load 200 kg. Rotation torque: 600-1100 kg-cm. Brake torque: 4,000 kg-cm. Diam. mast: 38-63 mm. Weight of the motor alone without the mast clamping parts: 3.4 kg. It can be fixed in a cage on a pylon or on a tubular mast as it is supplied with two additional mast fixings. It is also supplied with 25m of control cable and its connectors as well as its original installation manual.

Yaesu G-400 rotor and G-500A elevation motor control boxes    ~    Price : € 60 each or € 100 both

Perfect working condition. First owner. Packed and stored. Control boxes like new but some scratches on the G-400 box. Supplied with their original installation manual. Rotors are not supplied.

Transceiver Sommerkamp FT-767DX - Yaesu FT-707 for parts or repair    ~    Price : € 100

80m to 10m bands including WARC bands (10 m 1/2 band ~ 11 m 1/2 band). First owner. The transceiver is no longer in working order. The frequency mixing no longer works. Contact problems on certain connectors and/or relays. VFO OK. PA OK 100W. Optional CW 300 Hz filter installed. Supplied with original user manual containing all schematics.

Yaesu FV-707 external digital VFO in perfect working order    ~    Price : € 150

Bands: 80m to 10m / WARC bands included. Dual-loop PLL system that provides a 10 Hz step scan, the sound heard when scanning the tape is similar to that of an analog VFO. It also includes 12 programmable memory channels. Powered by the transceiver. It gives the FT-707 the stability of a current transceiver.

Yaesu MMB-2 mounting bracket    ~    Prix : € 30

This special mounting bracket allows the installation (under a car dashboard for example) of the FT-707 alone or with the FC-707. It also allows the installation of FC-707 and FV-707 together. This mounting bracket does not include the screws (metric) for fixing the devices or the attachment kit for the FC-707. The mounting bracket is very robust because it must be able to support the weight of the FT-707 and the FC-707 together (8.5 Kg). It is equipped with three device tilt positions.

Yaesu MMB-2 mounting bracket    ~    Prix : € 40

This special mounting bracket allows the installation (under a car dashboard for example) of the FT-707 alone or with the FC-707. It also allows the installation of FC-707 and FV-707 together. This mounting bracket includes the attachment kit for the FC-707 and 4 special screws (metric) for fixing the transceiver. The mounting bracket is very robust because it must be able to support the weight of the FT-707 and the FC-707 together (8.5 Kg). It is equipped with three device tilt positions.

Yaesu GS-065 thrust bearing - new    ~    Prix : € 30

Rotating mast thrust bearing, new condition, never used, in original packaging. Normally used to stabilize and secure a rotating mast used for directional antennas. Mast diameter from 38 to 65 mm. Weight: 1.5kg. This thrust bearing, maintains a smooth and steady rotation even when a strong wind pushes on the antenna and the mast.

Terms and Sales Policy :

- This page offers used or decommissioned second-hand equipment from Radio Station ON6WG / F5VIF.
- Proposals for exchange of material are not accepted.
- As a general rule, in order to offer OM prices, the amounts requested on this page are set if possible lower than the average
   prices asked on the web and on intermediary sales sites (if similar offers exist).
- Given the current prices for equivalent new equipment, the prices asked here are firm and not debatable.
- Any additional information can be obtained by e-mail.
- The material is sold in the state well known to the buyer and will not be taken back.
- In case of purchase, the material is to be taken on site. If the equipment has to be sent, it will be sent in a tracked postal parcel,
   with a tracking number communicated to the buyer.
- Shipping costs and possibly packaging are to be added to the displayed price. They will be determined by mutual agreement
   between the seller and the buyer and added to the purchase amount.
- In case of shipment, the material travels under the full responsibility of the buyer.
- The material will only be handed over or sent to the buyer after receipt of the total amount of the purchase.
- When the buyer finalizes a purchase, he agrees to the above conditions.